Specification

Physical Interface
WAN ADSL port
USB Complies to USB V1.1
Factory default reset button
LAN 10/100Mbps Auto-sensing Ethernet port
Power switch
Power jack
Physical Specification
Dimensions 7.28″ x 5.0″ x 1.85″ (185mm x 127mm x 47mm)
Power Requirement
Input 12V DC, 1A

ADSL Compliance

  • Compliant with ADSL Standards
    • Full-rate ANSI T1.413 Issue 2
    • G.dmt (ITU G.992.1)
    • G.hs (ITU G.994.1)
    • ADSL over ISDN/U-R2
  • Sync. Rate: up to 8Mbps for download rate and 1Mbps for
    upload rate.

ATM and PPP Protocols

  • ATM Adaptation Layer Type 5 (AAL5)
  • Multiple Protocol over AAL5 (RFC 2684, formerly RFC 1483)
  • Bridged or routed Ethernet encapsulation
  • VC and LLC based multiplexing
  • PPP over Ethernet (PPPoE)
  • PPP over ATM (RFC 2364)
  • Classical IP over ATM (RFC 1577)
  • OAM F4/F5

Network Protocols and Features

  • NAT, static routing and RIP-1/2
  • Supports UPnP
  • Supports multiple Application Level Gateway (ALG)
    algorithms for multimedia applications
  • Transparent bridging
  • Virtual Server and DMZ
  • SNTP, DNS relay and IGMP Proxy

Firewall & Virtual Private Network (VPN)

  • Built-in NAT firewall
  • Bridge filtering via MAC address
  • Local password protection
  • L2TP/PPTP/IPSec pass through

Management

  • Ease of use with Quick Installation Utility
  • Web-based GUI for remote and local management
  • Firmware upgrades via Web-based GUI and FTP/TFTP
  • System log to record historical information
  • Support DHCP server/client/relay
  • Diagnostic test utility